Istek, Inc. Portable & Laboratory type pH/DO/EC Meter

>> Products >> Controllers

DO Controller HD960RS
	Panel mounting 4~20mA,on/off control Solution-ground function RS485 communication & MODBUS

* Simultaneous display of DO/Air(%) and Temp.

* Microprocessor controllers - Reliable Monitoring

* Simple calibration with sensor

* Salinity compensation & Altitude compensation

* Upper & Lower limit setting - notification available

* Suitable for the field ( Wall, Panel and pipe installation IP65)

* Automatic temperature identification (NTC22K, NTC30K)

* Auto temperature compensation & Notification for calibration

* 4~20mA , on/off control function provided

* Setting available intervals of cleaning

* Solution-ground function to minimize sample interference

* RS485 communication & MODBUS

* Size : 96 x 96x 145 mm

Model	HD960	HD960RS
Measuring item	DO / Air / Temp.
Range	0~60.00 mg/l 0~600 %

Resolution	0.01 / 0.001 mg/l 0.001
Accuracy	±0.5% of reading ±1 digit
Temp.	0～100 ℃
Temp. accuracy	±0.2 °C ±1digit
Temp. Compensation	Automatic temperature recongnition NTC30K/NTC22K (Manual temp. compensation : 0~50 ℃)

Salinity compensation	0.0～45.0 ppt ( Manual)
Altitude compensation	0.500～2.500bar or 7.25～36.25psi ( Manual)
Calibration	1~2 point
Output	Analog output 1 : Isolated DC 0/4~20mA corresponding to measurement max. load 500Ω Analog output 2 : Isolated DC 0/4~20mA corresponding to Tempereture max. load 500Ω
Communication	x	RS485 (MODBUS)
Contact output	Contact output : Relay ON/OFF, max. 240VAC 0.5A Notification : HI / LO Control point
Washing setting	ON : 0~9999 seconds / OFF : 0~999.9 hours
Water proof	IP 65
Temperature	0 ~ 50 ℃
Dimension	96 X 96X 145 mm / 0.4 kg
Power supply	100 ~ 240VAC / ±10%, 50/60Hz

ISTEK Main Products

ISTEK digital ph meter Portable pH Meter Dissolved Oxygen Meter Conductivity Meter Multi parameter

COD Analyzer pH Controller DO Controller Conductivity Controller Conductivity Meter manufacturers

Bench top Multi Meter pH portable meter