- 144 * 144 microprocessor Chlorophyll transmitter

 - Waterproof & dust proof design, to fit wall/panel/pipe installation

 - With backlight sensor, automatic and manual backlight setting function

 - Providing a sensor self-cleaning device contact, the program set out

 - Large LCD screen, with operation status and special symbol display

 - Automatic calibration; manual/auto. Temperature compensation

 - With security password for the calibration and parameter setting

 - Equipped RS-485 MODBUS RTU protocol, it can connect to the digital system directly

 - Two sets of programmable output

Measuring item

Chlorophyll

Measuring range

0~5ug/l, 0~50ug/l, 0~500ug/l

Accuracy

1ppb rhodamine WT dye signal level corresponding value
plus or minus 5% correction function

Range of pressure

≤0.1 Mpa / 0~10m depth

Measuring temperature

0~45℃

Storage temp./ Usage Temp.

 -15~65℃ / 0~50℃

Hi/Lo Relay contact

2 sets Hi/Lo programmable, NO/OFF, 240 VAC/0.5A Max

Analogue output

1 or 2 way 4~20mA programmable analog signal ourput,
the user can set the corresponding output value, load 500

Calibration

Slope calibration

Requirements

Water chlorophyll distribution is very uneven,
 it is recommended that the multi point monitoring.
Water quality turbidity should be less than 50 NTU

Digital filtering

0~60 seconds (factory setting 30s)

Length of cable

10m 

Size of sensor

Ø37 x 220 mm / 0.8 kg

Dimension of meter

144 x 144 x 115 mm / 0.8 kg

Water proof

IP65/ NEMA 4

Material of sensor / O-ring

SUS316L / cable : PVC / Fluorine rubber

Power

100~240VAC ±10%, 50/60Hz